Social Work Research- Using a Logic Model to Focus Interventions and Achieve Desired Outcomes
In social work practice and in program development, it is possible to make faulty assumptions about what clients need and what social work activities will lead to. Consider the following:
A team of social workers meets to discuss their services to low-income young mothers. One social worker states that what the young mothers need most is information about community resources. She proposes that the social workers’ activities consist of making referrals to programs for public assistance for income support, food stamps, medical insurance, employment agencies, and educational resources. However, another team member points out that most clients are referred to their program from the public welfare office and health care programs. This suggests that the clients tend to possess knowledge of these common resources and have been able to access them.
How might the team explore what problems bring the clients to their agency? What might the team learn from client assessments? How can the team verify the desired outcomes of their services? Developing a logic model will help the team see a logical connection between problems, needs, intervention activities, and corresponding outcomes. This series of logical connections leads to formulating a theory of change, that is, a theory about how our work leads to the outcomes for clients.
To prepare for this Discussion, imagine that you are part of a work group charged with creating a logic model and generating a theory of change. Select a practitioner-level intervention for which you are interested in analyzing connections. Consider how a logic model might be applied to that practice.
Post a logic model and theory of change for a practitioner-level intervention. Describe the types of problems, the client needs, and the underlying causes of problems and unmet needs. Identify the short- and long-term outcomes that you think would represent an improved condition. Then describe interventions that would lead to a change in the presenting conditions. Be sure to search for and cite resources that inform your views.
ATTACHED:
Document: Randolph, K. A. (2010). Logic models. In B. Thyer (Ed.), The handbook of social work research methods (2nd ed., pp. 547–562). Thousand Oaks, CA: Sage. (PDF)
Figure 31.1
Logic Model
Logic Models
Karen A. Randolph
A
logic model is a diagram of the relationship between a need that a
program is designed to addret>s and the actions to be taken to address the
need and achieve program outcomes. It provides a concise, one-page pic-
ture of program operations from beginning to end. The diagram is made
up of a series of boxes that represent each of the program’s components,
inputs or resources, activities, outputs, and outcomes. The diagram shows how these
components are connected or linked to one another for the purpose of achieving
program goals. Figure 31.1 provides an example of the framework for a basic logic model.
The program connections illustrate the logic of how program operations will result in
client change (McLaughlin & Jordan, 1999). The connections show the “causal” relation-
ships between each of the program components and thus are referred to as a series of”if-
then” sequence of changes leading to the intended outcomes for the target client group
(Chinman, hum, & Wandersman, 2004). The if-then statements represent a program’s
theory of change underlying an intervention. As such, logic models provide a framework
that guides the evaluation process by laying out important relationships that need to be
tested to demonstrate program results (Watson, 2000).
Logic models come from the field of program evaluation. The idea emerged in
response to the recognition among program evaluators regarding the need to systematize
the program evaluation process (McLaughlin & Jordan, 2004). Since then, logic models
have become increasingly popular among program managers for program planning and
to monitor program performance. With a growing emphasis on accountability and out-
come measurement, logic models make explicit the entire change process, Lhe assump-
tions that underlie this process, and the pathways to reach ing outcomes. Researchers have
begun to use logic models for intervention research planning (e.g., Brown, Hawkins,
Arthur, Briney, & Abbott, 2007).
The following sections provide a description of the components of a basic logic model
and how these components are linked together, its relationship to a p rogram’s theory of
[ : Inputs 1–_.,•1 Ac~vities ,II—-.~•{ .Outputs ·11—~·1 Outcomes I
AUTHOR’S NOTE: The author wishes to acknowledge Dr. Tony Tripodi for his thoughlful comments
on a drafl of this chapter.
547
548 PART V • CONCEPTUAL RESEARCH
change, and its uses and benefits. The steps for creating a logic model as well as the chal-
lenges of the logic modeling process will be presented. The chapter concludes with an
example of how a logic model was u~cd to enhance program outcomes for a family liter-
acy program.
Components of a Logic Model
Typically, a logic model has four components: inputs or resources, activities, outputs, and
outcomes. Outcomes can be further classified into short-term outcomes, intermediate
outcomes, and long-term outcomes based on the length of time it takes to reach these
outcomes (McLa ughlin & Jordan, 2004) . The components make up the connection
between the planned work and the intended results (W. K. Kellogg Foundation, 2004).
The planned work includes the resources (the inputs) needed to implement the program
as well as how the resources will be used (the activities). The intended results include the
outputs and outcomes that occur as a consequence of the planned work. Figure 31.2
expands on the model illuslrated in Figure 3 1.1 by adding examples of each component.
This particular logic model, adopted from frechtling (2007), provides an illustration of
the components of an intervention designed to prevent substance abuse and other prob-
lem behaviors among a population of youth. The intervention is targeted toward improv-
ing parenting skills, based on the assumption that positive parenting leads to prosocial
behaviors among youth {Bahr, Hoffman, & Yang, 2005). The following section provides
definitions and examples of each logic model component, using this illustration.
Resources
Resources, sometimes referred to as inputs, include the human, financial, organizational,
and community assets that are available to a program to achieve its objectives (W. K.
Kellogg Foundation, 2004). Resources are used to support and facilitate the program
activities. They are usually categorized in terms of funding resou rces or in-kind contribu-
tions (Frechtling, 2007) .
Some resources, such as laws, regulations, and funding requirements, are external to
the agency (United Way of America, 1996). Other resources, such as staff and money, are
easier lo quantify than others (e.g., community awareness of the program; Mertinko,
Novotney, Baker, & Lange, 2000). As Fn.:c:htli ng (2007) notes, it is important to clearly and
thoroughly identify the available resources during the logic modeling process because this
information defines the scope and parameters of the program. Also, this inCormation is
critical for others who may be interested in replicating the program. The logic model in
Figure 31.2 includes fu nding as one of its resources.
Activities
Activities represent a program’s service methodology, showing how a program intends on
using the resources described previously to carry out its work. Activities are also referred
to as action step!; (McLaughlin & Jordan, 2004). They are the highly specific tasks that
p rogram staffs engage in on a daily basis to provide services to clients (Mertinko
et al., 2000) . They include all aspects of program implementation, the processes, tools,
events, technology, and program actions. The activities form the foundation toward facil-
itating intended client changes or reaching oulcornes (W. K. Kellogg Foundation, 2004).
Some examples are establishing community councils, providing professional develop-
ment training, or initiating a media campaign (Frechtling, 2007). Other examples are
CHAPTER 31 • l OCIC MO DELS 549
Inputs Activities Outputs Outcomes
Short Term Intermediate Long Term
Feedback Loop j
_J
I
Decreased
K~
Increased
I
Develop and Number of Increased
youth Funds .~ initiate ~edia st~tions a~opting r– awareness f- positive 1—–+ of positive substance
-~m~tg~– -.:::c -campatgn J parenting parenting – abv?~d’
~-‘.:-
/
I
Develop and Number of Increased
distribute – 1> fact sheets 1- enrollment
fact sheets distributed in parenting
programs
Figure 31.2 Example of l ogic Model With Components, Two Types of Connections, and a Feedbaclc loop
providing shelter for homeless families, educating the public about signs of child abuse,
or providing adult mentors for youlh {United Way of America, 1996). Two activities,
“Develop and initiate media campaign” and “Develop and distribute fact sheets;’ are
included in the logic model in Figure 31.2. Activities lead to or produce the program out-
puts, described in the following section.
Outputs
The planned works (resources and activities) bring about a program’s desired resul ts,
including outputs and outcomes (W. K. Kellogg Foundation, 2004) . Outputs, also referred
to as units of service, are the immediate results of program activities in the form of types,
levels, and targets of services to be delivered by the program (McLaughlin & Jordan ,
1999). They are tangible products, events, or serv ices. They provide the documentation
that activities have been implemented and, as such, indicate if a program was delivered to
the intended audience at the intended dose (W. K. Kellogg FounJation, 2004). Outputs
arc typically described in terms of the size and/or scope of the services and products pro-
duced by the program and thus are expressed numerically (Frechtling, 2007). Examples of
program outputs include the number of classes taught, meetings held, or materials p ro-
duced and distributed; program par ticipation rates and demography; or hours of each
type of service provided (W. K. Kellogg Foundation, 2004). Other examples are the
number of meals provided, classes taught, brochures distributed, or participants served
(Frecht1ing, 2007) . While outputs have little inherent value in themselves, they provide
the link between a program’s activities and a program’s outcomes (United Way of
America, 1996). The logic model in Figure 31.2 includes Lhc number of stations adopting
the media campaign and the number of fact sheets distributed as two outputs for the pre-
vention program.
550 PART V • CONCEPTUAL RESEARCH
Outcomes
Outcomes arc Lhe specific changes experienced by the program’s clients or target group as
a consequence of participating in the program. Outcomes occur as a result of the program
activities and outputs. These changes may be in behaviors, attitudes, skill level, status, or
level of functioning (W. K. Kellogg Foundation, 2004). Examples include increased knowl-
edge of nutritional needs, improved reading skills, more effective responses to conflict,
and finding employment (United Way of America, 1996). Outcomes are indicalors of a
program’s level of success.
McLaughlin and Jordan (2004) make the point that some programs have multiple,
sequential outcome structures in the form of short-term outcomes, intermediate out-
comes, and long-term outcomes. In these cases, each type of outcome is linked tempo-
rally. Short-term outcomes arc client changes or benefits that are most immediately
associated with the program’s outputs. They are usually realized by clients within 1 to
3 years of program completion. Short-term outcomes are linked to accomplishing inter-
mediate outcomes. Intermediate outcomes are generally attainable in 4 to 6 years. Long-
term outcomes are also referred to as program impacts or program goals. They occur as a
result of the intermediate outcomes, usually within 7 to 10 years. In this format, long-
term outcomes or goals are directed at macro-level change and target organizations, com-
munities, or systems (W. K. Kellogg Foundation, 2004).
As an example, a sequen tial outcome structure with short- term, intermediate, and
long-term outcomes for the prevention program is displayed in Figure 31.2. As a result of
hearing the public service announcements about positive parenting (the activity), parents
enroll in parenting programs to learn new parenting skills (the short-term outcome).
Then they apply these newly learned skills with their children (the intermediate out-
come), which leads to a reduction in substance abuse among youth (the long-term impact
or goal the parenting program was designed to achieve).
Outcomes are often confused with outputs in logic models because their correct clas-
sification depends on the context within which they are being included. A good example
of this potential confusion, provided in the United Way of America manual ( 1996, p. 19),
is as follows. The number of clients served is an output when it is meant to describe the
volume of work accomplished. In this case, it does not relate directly to client changes or
benefits. However, the number of clients served is considered to be an outcome when the
program’s intention is to encourage clients to seek services, such as alcohol treatment.
What is important to remember is that outcomes describe intended client changes or
benefits as a result of participating in the program while outputs document products or
services produced as a result of activities.
Links or Connections Between Components
A critical part of a logic model is the connections or links between the components. The
connections illustrate the relationships between the components and the process by
which change is hypothesized to occur among program participants. This is referred to as
the program theory (Frechtling, 2007). It is the connections illustrating the program’s
theory of change that make the logic model complicated. Specifying the connections is
one of the more difficult aspects of developing a logic model because the process requires
predicting the process by which client change is expected to occur as a result of program
participation (Frechtling, 2007).
CHIII’TER 31 • lOGIC M ODtLS 551
Frechtling (2007) describes nvo types of connections in a logic model: connections
that link items within each component and connections that illustrate the program’s
theory of change. The first type, items within a component, is connected by a straight line.
This line shows that the items make up a particularcomponent.As an example, in Figure 31.2,
nvo activities, “Develop and initiate media campaign” and “Develop and distribute fact
sheets,” are linked together with a straight line because they represent the items within the
activities component. Similarly, two outputs, “Number of stations adopting the cam-
paign” and “Number of fact sheets distributed;’ arc connected as two items within the
outputs component.
The second type of connection sh<.>ws how the components interact with or relate to
each other to reach expected outcomes (Frechtling, 2007) . In essence, this is the program’s
theory of change. Thus, instead of straight lines, arrows are used to show the direction of
influence. Frechtling (2007) clarifies that “these directional connections are not just a
kind of glue anchoring the otherwise floating boxes. Rather they portray the changes thaL
arc expected to occur after a previous acLivity has taken place, and as a result of it” (p. 33).
She points out that the primary purpose of the evaluation is to determine the nature of
the relationships between components (i.e., whether the predictions are correct). A logic
model that illustrates a fully developed theory of change includes links between every
item in each component. In other words, every item in every component must be con-
nected to at least one item in a subsequent component. This is illustrated in Figure 31.2,
which shows that each of the two items within the activities component is linked to an
item within the output component.
Figure 31.2 provides an example of the predicted relationships between the compo-
nents. This is the program theory about how the target group is expected to change. The
input or resource, funding, is connected to the tv,ro activities, “Develop and initiate media
campaign” and “Develop and distribute fac t sheets.” Simply put, this part of Figure 31 .2
shows that funding will be used to support the development and initiation of PSA cam-
paigns and the distribution of fact sheets.
The sequencing of the connections between components also shows that these steps
occur over a period of time. While this may seem obvious and relatively inconsequential,
specifying an accurate sequence has time-based implications, particularly when short-
term, intermediate, and long-term outcomes are proposed as a part of the theory of
change (Frechtling, 2007). Rcca11 that the short-term outcomes lead to achieving the
intermediate outcomes, and the intermediate outcomes lead to achieving long-term out-
comes. Thus, the belief or underl}ing assumption is that short-term outcomes mediate
(or come between) relationships benv-een activities and intermediate outcomes, and
intermediate outcomes mediate relations between short-term and long-term outcomes.
Related, sometimes logic models display feedback loops. Feedback loops show how the
information gained from implementing one item can be used to refine and improve other
items (Frechlling, 2007). f or instance, in Figure 31.2, the feedback loop from the short-
term outcome, “Increased awareness of positive parenting;’ back to the activity, “Develop
and initiate media campaign;’ indicates that the findings for “Increased awareness of pos-
itive parenting” arc used to improve the PSA campaigns in the next program cycle.
Contextual Factors
Logic models describe programs that exist and are affected by contextual factors in the
larger environment. Contextual factors are those important features of the environment
552 PART V • CONCEPTUAL R ESEARCH
in which the project or intervention takes place. They include the social, cultural, and
political aspects of the environment (Frechtling, 2007). They are typically not under the
program’s control yet are likely to influence the program either positively or negatively
(McLaughlin & Jordan, 2004 ). Thus, it is critical to identify relevant contextual factors
and to consider their potential impact on the program. McLaughlin and Jordan (1999)
point out that understanding and articulating contextual factors co ntribu tes to an under-
standing of the fo undation upon which performance expectatio ns are established.
Moreover, this knowledge helps to establish the parameters for explaining program
results and developing program improvement strategies that are li kely to be more mean-
ingful and thus more successful because the information is more complete. finally, con-
textual factors clarify situations under which the program results might be expected to
generalize and the issues that might affect replication (Frechtling, 2007) .
Harrell, Burt, Hatry, Rossm an, and Roth (1996) identify two types of contextual fac-
tors, antecedent and media6ng, as outside facto rs that could influence the program’s
design, implementation, and results. Antecedent factors are those that exist prior to
program implementation, such as characteristics of the client target population or com-
munity characteristics such as geographical and economic conditions. Mediating factors
are the environmental influences that emerge as the program unfolds, such as new laws
and policies, a change in economic conditions, or the startup of other new programs pro-
viding similar services (McLaughlin & jordan, 2004).
Logic Models and a Program’s Theory of Change
Definition
Logic models p rovide an illustration of the components of a program’s theot-y and how
those components are linked together. Program theory is defined as “a plausible and sen-
sible model of how a program is supposed to work” (Bickman, 1987, p. 5). Program
theory incorporates “program resources, program activities, and intended program out-
comes, and specifies a chain of causal assumptions linking resources, activities, interme-
diate outcomes, and ultimate goals” (Wholey, 1987, p. 78). Program theory e.>..-plicates the
assumptions about how the program components link together from program star t to
goal attainment to realize the program’s intended outcomes (Frechtling, 2007). Thus, it is
often referred to as a program’s theory of change. Frechtling (2007) suggests that both
previous research and knowledge gained from practice experience arc useful in develop-
ing a theory of change.
Relationship to logic Models
A logic model provides an illustration of a program’s theory of change. It is a useful tool
for describing program theory because it shows the connections or if-then relationships
between program components. In other words, moving from left to right from one com-
ponent to the next, logic models provide a diagram of the rationale or reasoning underly-
ing the theory of change. If-then statements connect the program’s components to form
the theory of change (W. K. Kellogg Foundation, 2004). For example, certain resources or
inputs are needed to carry out a program’s activities. The first if-then statement links
resources to activities and is stated, “If you have access to these resources, then you can use
them to accomplish your planned activities” (W. K. Kellogg Foundation, 2004, p. 3). Each
CHAPTER 31 • LOCIC MODELS SS3
component in a logic model is linked to the other components using if-then statemen ts to
show a program’s chain of reasoning about how client change is predicted to occur. The
idea is that “if the right resources are transformed into the right activities for the right
people, then these will lead to the results the program was designed to achieve”
(McLaughlin & Jordan, 2004, p. 11). It is important to define the components of an inter-
vention and make the connections between them explicit (Frechtling, 2007).
Program Theory and Evaluation Planning
Chen and Rossi (1983) were among the first to suggest a program theory-driven
approach to evaluation. A program’s theory of change has significant utility in develop-
ing and implementing a program evaluation because the theory provides a framework
for determining the evaluation questions (Rossi, Lipsey, & Freeman, 2004) . As such, a
logic model that illustrates a program’s theory of change provides a map to inform the
development of relevant evaluation questions at each phase of the evaluation. Rossi
et al. (2004) explain how a program theory-based logic model enhances the develop-
ment of evaluation questions. First, the process of articulating the logic of the
program’s change process through the development of the logic model prompts discus-
sion of relevant and meaningful evaluation questions. Second, these questions then lead
to articulating expectations for program performance and inform the identification of
criteria to measure that performance. Third, obtaining input from key stakeholders
about the theory of change as it is displayed in the logic model increases the likelihood
of a more comprehensive set of questions and that critical issues have not been over-
looked. To clarify, most agree that this is a team effort that should include the program
development and program evaluation staff at a minimum, as well as other stakeholders
both internal and external to the program as they are available (Dwyer & Makin, 1997;
Frech tling, 2007; Mclaughlin & Jordan, 2004). The diversity of perspective and skill sets
among the team members (e.g., program developers vs. program evaluators) enhances
the depth of understanding of how the program will work, as diagramed by the logic
model (Frechtling, 2007). As D”vyer and Makin (1997) state, the team approach to
developing a theory-based logic model promotes “greater stakeholder involvement, the
opportunity for open negotiation of program objectives, greater commitment to the
final conceptualization of the program, a shared vision, and increased likelihood to
accept and utilize the evaluation results” (p. 423) .
Uses of Logic Models
Logic models have many uses. They help Lo integrate the entire program’s planning and
implementation process from beginning to end, including the evaluation process (Dwyer
& Makin, 1997). They can be used at all of a program’s stages to enhance its success
(Frechlling, 2007; W. K. Kellogg Foundation, 2004). For instance, at the program design
and planning stage, going through the process of developing logic models helps to clarify
the purpose of the program, the development of program strategies, resources that are
necessary to attaining outcomes, and the identification of possible barriers to
the program’s success. Also, identifying program components such as activities and
outcomes prior to program implementation provides an opportunity to ensure that
program outcomes inform program activities, rather than the other way around (Dwyer
& Makin, 1997).
554 PART V • CoNcEPTUAl RESEA RCH
During the p rogmm implementation phase, a logic model provides the basis fo r the
development of a management plan to guide program monitoring activities and to
improve program processes as issues arise. In other words, it helps in identifying and
highlighting the key program processes to be tracked to ensure a program’s effectiveness
(United Way of America, 1996).
Most important, a logic model facilitates evaluation planning by providing the evalua-
tion framework for shaping the evaluation across all stages of a project. Intended out-
comes and the process for measuring these outcomes are displayed in a logic model
(Watson, 2000), as well as key points at which evaluation activities should take place
across the life of the program (McLaughlin & Jordan) 2004). Logic models support both
formative and summative evaluations (Frechtling, 2007). They can be used in conducting
summativc evaluations to determine what has been accomplished and, importantly, the
process by which these accomplishments have been achieved (Frechtling, 2007) . Logic
models can also support formative evaluations by organizing evaluation activities, includ-
ing the measurement of key variables or performance indicators (McLaughlin & Jordan,
2004) . From this information, evaluation questions, relevant indicators, and data collec-
tion strategies can be developed. The following section expands on using the logic model
to develop evaluation questions.
The logic model provides a framework for developing evaluation questions about
program co ntext, program efforts, and p rogram effectiveness (Frecht ling, 2007;
Mertinko et al., 2000). Together, these three sets of questions help to explicate the
program’s theory of change by describing the assumptions about the relationships
between a program’s operations and its predicted outcomes (Rossi et al. , 2004) .
Context questions explore program capacity and relationships external to the program
and help to identify and understand the impact of confo unding factors or external
influences. Program effort and effectiveness quest ions correspond to particular com-
ponents in the logic model and thus explore program processes toward ach ieving
program outcomes. Questions a bout effor t address the planned work of the program
and come from the input and activities sections of the evaluation model. They address
program implementation issues such as the services that were provided and to whom.
These questions focus on what happened and why. Effectiveness or outcome questions
address program results as described in the output and outcomes section of the logic
model. From the questions, indicators and data collection strategies can then be devel-
oped. Guidelines for using logic models to develop evaluation questions, indicators,
and data collection strategies are provided in the Logic Model Development Guide
(W. K. Kellogg Foundation, 2004).
In addition to supporting program efforts, a logic model is a useful communication
tool (McLaughlin & Jordan, 2004). For instance, developing a logic model provides the
opportunity for key stakeholders to discuss and reach a common understanding, includ-
ing underlying assumptions, about how the program operates and the resources needed
to achieve program processes and outcomes. ln fact, some suggest that the logic model
development process is actually a form of strategic planning because it requires partici-
pants to articulate a program’s vision, the rationale for the program, and the program
processes and procedures (‘Watson, 2000) . This also promotes stakeholder involvement in
program planning and consensus building on the program’s design and operations.
Moreover, a logic model can be used to explain program procedures and share a compre-
hensive yet concise picture of th e program to community partners, funders, and others
outside of the agency (McLaughlin & Jordan, 2004).
CHAPTER 31 • LOGIC M ODF I S 555
Steps for Creating Logic Models
McLaughlin and Jordan (2004) describe a five-stage process for developing logic models.
The first stage is to gather extensive baseline information from multiple sources about the
nature of the problem or need and about alternative solutions. The W. K. Kellogg
Foundation (2004) also suggests collecting information about community needs and
assets. This information can then be used to both define the problem (the second stage of
developing a logic model) and identify the program clements in the form of logic model
components (the third stage of logic model development). Possible information sources
include existing program documentation, interviews with key stakeholders internal and
external to the program, strategic plans, annual performance plans, previous program
evaluations, and relevant legislation and regulations. It is also important to review the lit-
erature about factors related to the problem and to determine the strategies others have
used in attempting to address it. This type of information provides supportive evidence
that informs the approach to addressing the problem.
The information collected in the first stage is then used to define the problem, the
contextual factors that relate to the problem, and Lhus the need for the program. The
program should be conceptualized based on what is uncovered abo ut the nature and
extent of the problem, as well as the factors that are correlated with or cause the prob-
lem. It is also important at this stage to develop a clear idea of the impact of the prob-
lem across micro, mezzo, and macro domains. The focus of the program is then to
address the “causal” factors to solve the problem. In addition, McLaughlin and Jordan
(2004, p. 17) recommend identifying the environmental factors that are likely to affect
the program, as well as ho·w these conditions might affect program outcomes.
Understanding the relationship between the program and relevant environmental fac-
tors contributes to framing its parameters.
During the third stage, the elemen ts or components of the logic model are identified,
based on the findings that emerged in the second stage. McLaughlin and Jordan (2004)
recommend starting out by categorizing each piece of information as a resource or input,
activity, output, short-term outcome, intermediate outcome, long-term outcome, or con-
textual factor. While some suggest that the order in which the components arc identified
is inconsequen tial to developing an effective logic model, most recommend beginning
this process by identifying long-term outcomes and working backward (United Way of
America, 1996; W. K. Kellogg Foundation, 2004) .
The logic model is drawn in the fourth stage. Figure 31.2 provi.des an example of a typ-
ical logic model. This diagram includes columns of boxes representing the items for each
component (i.e., inputs, activities, outputs, and short-term, intermediate, and long-term
outcomes). Text is provided in each box to describe the item. The connections between
the items within a component are shown with straight lines. The links or connections
between components are shown with one-way directional arrows. Program components
may or may not have one-on-one relationships with one another. In fact, it is likely that
components in one group (e.g., inputs) will have multiple connections to components in
another group (e.g., activities). For example, in Figure 31.2, we show that the funding
resource leads to two activities, “Develop and initiate media campaign” and “Develop and
distribute fact sheets.” Finally, because activities can be described at many levels of detail,
McLaughlin and Jordan (2004) suggest simplifying the model by grouping activities that
lead to the same outcome. They also recommend including no more than five to seven
activity groupings in one logic model.
556 PART V • CONCEPTUAl RESEARCii
Stage 5 focuses on verifying the logic model by getting input from all key stakeholders.
McLaughlin and Jordan (2004) recommend applying the if-then statements presented by
United Way of America (1996) in developing hypotheses to check the logic model in the
following manner:
given observations of key contextual factors, if resources, then program activities; if
program activities, then outputs for targeted customer groups; if outputs change
behavior, first short term, then intermediate outcomes occur. If intermediate out-
comes occur, then longer-term outcomes lead to the problem being solved. (p. 24)
They also recommend answering the following questions as a part of the verification
process (pp. 24-25):
1. Is the level of detail sufficient to create understanding of the elements and their
interrela ti onsh ips?
2. Is the program logic complete? That is, arc all the key elements accounted for?
3. Is the program logic theoretically sound? Do all the elements fit together logically?
Are there other plausible pathways to achieving the program outcomes?
4. Have all the relevant external contextual factors been identified and their potential
influences described?
Challenges in Developing Logic Models
Frechtling (2007) describes three sets of challenges in developing and using logic models,
including (a) accurately portraying the basic features of the logic model, (b) determining
the appropriate level of detail in the model, and (c) having realistic expectations about
what logic models can and cannot contribute to program processes. These challenges are
reviewed in more detail in the following section.
Portraying the Logic Model’s Basic Features Accurately
The basic features of a logic model must be clearly understood in order for the logic
model to be useful. In particular, logic model developers often encounter difficulty in four
areas: confusing terms, substituting specific measures for more general outcomes, assum-
ing unidirectionality, and failing to specify a timefrarne for program processes (Frechtling,
2007; McLaughlin & Jordan, 2004).
One issue in developing the logic model is accurately differentiating between an activity
or output and an outcome. Frequently, activities and outputs are confused witl1 outcomes
(Frechtling, 2007). They can be distinguished by remembering that activities are steps or
actions taken in pursuit of producing the output and thus achieving the outcome. Outputs
are products that come as a result of completing activities. They are typically expressed
numerically (e.g., the number of training sessions held). Outputs provide the documenta-
tion that activities have occurred. They also link activities to outcomes. Outcomes are
statements about participant change as a result of experiencing the intervention.
Outcomes describe how participants will be different after they finish the program.
Another issue in portraying the basic features of logic models accurately is not confus-
ing outcomes with the instruments used to measure whether the outcomes were achieved.
C HAP t ER 31 • l OGIC M ODHS 557
For example, the outcome may be decreased depression, as measured by an instrument
assessing a participant’s level of depression (Center for Epidemiological Studies-
Depression Scale; Radloff, 1977). Some may confuse the outcome (i.e., decreased depres-
sion) with the instrument (i.e., Center for Epidemiological Studies- Depression Scale) that
was used to determine whether the outcome was met. To minimize the potential for this
confusion, Frechtling (2007) recommends developing the outcome lirsl and then identify-
ing the appropriate instrument for determ ining that the outcome has been reached.
A thiru issue in logic model development is avoiding the assumption that the logic
model and, by implication, the theory of change that the logic model portrays move in a
unidirectional progression from left to right {Frechtling, 2007; McLaughlin & Jordan,
2004). While the visual display may compel users to think about logjc models in this way,
logic models and the programs they represent are much more dynamic, with feedback
loops and interactions among components. The feedback loop is illustrated in Figure 31.2,
showing that the experiences and information generated from reaching short-term out-
comes are used to refine and, it is hoped, improve the activities in the next program cycle
that are expected to lead to these outcomes. Also, assuming uniform directionality can
enforce the belief that the inputs dTive the project, rather than attaining the outcomes.
This underscores the importance of starting with the development of outcomes when
putting together a logic modeL
The final issue is including a timeframe for carrying out the processes depicted in the
logic model. The lack of a tirneframe results in an incomplete theory of change as well as
problematic expectations about when outcomes will be reached (Frechtling, 2007).
Whether outcomes are expected too soon or not soon enough, key stakeholders may
assume that the theory of change was not accurate. Developing accurate predictions of
when outcomes will be reached is often d ifficu lt, especially with new projects in which
very li ttle is known abou t program processes and so forth. In this case, as more clarity
emerges about the amount of time it will take to complete activities, tirneframes should
be revisited and modified to reflect the new information.
Determining the Appropriate Level of Detail
A second set of challenges is to determine how much detail to include in the logic model.
The underlying dilemma is the level of complexity. Models that are too complex, with too
much detail, are lime-consuming to develop and difficult to interpret. Thus, they are
likely to be cumbersome to use. Models that lack enough information may depict an
incomplete theory of change by leaving out important information. For instance, if activ-
ities are combined into particular groups, it is possible that important links between spe-
cific activities, outputs, and outcomes wiJJ not be represented. This increases Lhe
possibility of making faulty assumptions about program opera lions and how these oper-
ations lead to positive participant outcomes.
Realistic Expectations
The fmal set of challenges in using logic models is not expecting more from logic models
than what they are intended to provide. Frechtling (2007, p. 92) notes that some may
inaccurately view the logic model as a “cure-ali” and that, just by its mere existence, the
logic model will ensure the success of the program and the evaluation. Of course, the effi-
cacy of a logic model depends on the quality of its design and components. A logic model
cannot overcome these types of problems. Frcchtling identifies four common issues
here. First, sometimes new programs are such that applying the theory of change and a
558 P11RT V • CoNctPI’UAl RESEARCH
representative logic model is premature. This is the case for programs in which a priori
expectations about relationships between activities and outcomes do not exist.
A second risk in this area is fai ling to consider alternative theories of change.
Alternative explanations and competing hypotheses should be explored. Focusing on only
one theory of change may result in not recognizing and including important factors that
fall outside of the theorys domain. Ignoring these competing fac tors may result in the
failure of the logic model and the program.
Third and related, it is critical to acknowledge the influence of contextual factors that
arc likely to affect the program. Interventions always exist and function wiLhin a larger
environment. Contextual factors influence the success or failure of these interventions.
For instance, one contextual factor that might affect outcomes of the program diagrammed
in Figure 31.2 is the diversity of the target group. As Frechtling (2007) observes, this diver-
sity may include language differences among subgroups, which need to be accounted for
in developing program materials.
finally, logic models cannot fully compensate for the rigor of experimental design
when testing the impact of interventions on outcomes (Frechtling, 2007) . The logic
model explicates the critical components of a program and the processes that lead to
desired outcomes (the program theory of change). The implementation of the model
provides a test of the accuracy of the theory. However, validation of the logic model is not
as rigorous a proof as what is established through study designs employing experimental
or quasi-experimental methodologies. Causality cannot be determined through logic
models. \Alhen possible, an evaluation can be strengthened by combining the advantages
of logic modeling with experimental design.
Logic Modeling in Practice: Building
Blocks Family Literacy Program
The following provides an example of logic modeling in practice. The example describes the
use of a program logic model in developing, implementing, and evaluating the Building
Blocks family literacy program and how client exit data were then used to revise the model in
a way that more explicitly illustrated the program’s path•.vays to achieving intended outcomes
(i.e., feedback loop; Unrau, 2001, p. 355). The original program outcomes were to increase
(a) children’s literacy skills and (b) parents’ abilities to assist their children in developing lit-
eracy skills. The sample included 89 families who participated in the 4-week program during
its initial year of operation. The following describes the process by which the logic model was
developed and how the client outcome data were used to fme- tune the logic model.
The family literacy program’s logic model was created at a one-day workshop facili-
tated by the evaluator. Twenty key stakeholders representing various constituencies,
including program staff (i.e., steering committee members, administration, and literacy
workers), representatives from other programs (i.e., public school teachers, child welfare,
and workers and clients from other literacy programs), and other interested citizens, par-
ticipated in the workshop (Unrau, 2001, p. 354). A consensus decision-making process
was used to reach an agreement on all aspects of the process, including the program pur-
pose, the program objectives, and the program activities.
During the workshop, stakeholders created five products that defined the program
parameters and informed the focus of the evaluation. These products included an organi-
zational chart, the beliefs and assumptions of stakeholders about client service delivery,
the questions for the evaluation, the program’s goals and objectives, and the program
CHAPTER 31 • l OGIC MoDElS 559
activities. The program goals, objectives, and activities were then used to develop the orig-
inallogic model.
One of the evaluation methods used to assess client outcomes was to conduct semi-
structured phone interviews with the parents after families completed the program.
Random selection procedures were used to identify a subset (n = 35 or 40o/o) from the
list of all parents to participate in the interviews. Random selection procedures were used
to ensure that the ex-periences of the interviewees represented those of all clients served
during the evaluation time period. Relative to the two program outcomes, respondents
were asked to provide examples of any observed changes in both their children’s literacy
skills (Outcome 1) and their ability to assist their children in developing literacy skills
(Outcome 2; Unrau, 2001, p. 357). The constant comparison method was used to analyze
the data (Patton, 2002). In this method, meaningful units of texi: are assigned to similar
categories to identify common themes.
What emerged from the parent interviews was more detailed information about how
the two intended outcomes were achieved. Parent experiences in the program suggested
four additional processes that link to reaching the two final outcomes. This information
was added to the original logic model to more fully develop the pathways to improving
children’s literacy skills through the family literacy program. These additional outcomes
were actually steps toward meeting the two originally intended outcomes and thus iden-
tified as intermediate outcomes and ne-cessary steps toward achieving the originally stated
long-term outcomes. Figure 31.3 provides a diagram of the revised logic model. The
shaded boxes represent the components of the original logic model. The other compo-
nents were added as a result of the parent exit interview data.
Input j I Activities I Short-Term Outcomes I [ Intermediate Outcomes J I Long-Term :Outcomes j
Improve child’s
behavior
Increase parent’s
own literacy skills
Figure 31.3 Example of a Revised Program Logic Model for a Family Literacy Program
SOURCE: Unrau (2001}. Copyright November 21, 2007 by Elsevier limited. Reprinted with permission.
NOTE: The shaded boxes represent the logic model’s original components. The other boxes were added as a result of feedback from clients
after program completion.
560 PART V • CONCEPTUAL RESEARCH
While the parent interview data were useful in revising the program logic about client
change, it is important to interpret this process within the appropriate context. This part
of the evaluation does not provide evidence that the program caused client change (Rossi
et al., 2004). This can only be determined through the use of experimental methods with
random assignment. Nonetheless, these paren t data contribute to developing a more fully
developed model for understanding how family literacy programs work to improve out-
comes for children. Experimental methods can then be used to test the revised model for
the purpose of establishing the causal pathways to the intended outcomes.
Conclusion
The purpose of this chapter was to introduce the reader to logic models and to the logic
modeling process. Logic models present an illustration of the components of a program
(inputs, activities, outputs, and outcomes) and how these components connect with one
another to facilitate participant change (program theory). They are tools to assist key
stakeholders in program planning, program implementation and monitoring, and espe-
cially program evaluation. They can also be used as communication tools in explaining
program processes to key stakeholders external to the program. Creating a logic model is
a time-consuming process with a number of potential challenges. Nonetheless, a well-
developed and thoughtful logic model is likely to ensure a program’s success in reaching
its intended outcomes.
References
Bahr, S., Hoffman, J., & Yang, X. (2005). Parental and peer influence on the risks of adolescent drug
use. journal ofPrirnary Prevention, 26, 529- 551.
Bickman, L. (1987). The function of program theory. In L. Bickman (Ed.), New directions in evalu-
ation: Vol. 33. Using program theory in evaluation (pp. 1- 16). San Francisco: Jossey-Bass.
Brown, E. C., Hawkins, J. D., Arthur, M. W., Briney, J. S., & Abbot t, R. D. (2007). Effects of
Communities that Care on prevention services systems: Findings from the Community Youth
Devcloprnenl sLudy at 1.5 years. Prevention Science, 8, 180-191.
Chen, H.-I., & Rossi, P. H. (1983). Evaluating with sense: The theory-driven approach. Evaluation
Review, 7, 283- 302.
Chinrnan, M., Imrn, P., & Wandersman, A. (2004). Geuing to outcomes 2004. Santa Monica, CA:
RAND Corporation.
Dvvyer, J. J. M., & Makin, S. (1997). Using a program logic model that focuses on performance mea-
surement to develop a program. Canadian journal of Public Health, 88, 421-425.
Frechtling, J. A. (2007). Logic modeling methods in program evaluat.ion. San Francisco: Jossey-Bass.
Harrell, A., Burt, M., Hatry, H ., Rossman, S., & I”l.oth, J. (1996). Evaluation strategies for human
services programs: A guide for policy make1·s and providers. Wash ington, DC: The Urban
Institute.
McLaughlin, J. A. , & Jordan, G. B. (1999). Logic models: A tool fo r tell ing your program’s perfor-
mance story. Evaluation and Program Plar~ning, 22, 65- 72.
McLaughlin, J. A., & Jordan, G. B. (2004). Using logic models. In J. S. Wholey, H. P. Hatry, & K. E.
Newcomer (Eds.), Handbook of program evaluatiOn (pp. 7- 32). San Francisco: )ossey-Bass.
Mertinko, E., Novotney, L. C., Baker, T. K., & Lange, J. (2000). Evalual’ing your program: A beginner’s
self-evaluation workbook for mentoring programs. Potomac, MD: Information Technology
International.
CHAPTER 3 I • l OviC Moons 561
Patton, M. (2002). Qualitative research and evaluation methods (3rd ed.). Thousand Oaks, CA: Sage.
Radloff, L. S. (1977). The CES-D scale: A self-report depression scale for research in the general
popuJation. Applied Psychological Measurement, 3, 385-401.
Rossi, P. H., Lipsey, M. W., & Freeman, I I. E. (2004). Evaluation: A systematic approach. Thousand
Oaks, CA: Sage.
United Way of America. (1996). Measuring program outcomes: A practical approach. Retrieved
November I I, 2007, from ww·w.unitedway.org/Outcomes/Resources/MPO/iudcx.cfm
Unrau, Y. A. (2001). Using client exit interviews to illuminate outcomes in program logic models: A
case example. Evaluation and Program Planning, 24, 353-361.
Watson, S. (2000). Using results to improve the lives of children and families: A guide for public-private
child care partnerships. Retrieved ~ovember 11, 2007, from www.nccic.acf.hhs.gov/ccpart:nerships/
resource.htm
Wholey,). S. (1987). Evaluability assessment: Developing program theory. In L. Bickman ( Ed.),
New directions in evaluation: Vol. 33. Using program theory in evalua.tio11 (pp. 77 92). San
Francisco: Jossey-Bass.
W. K. Kellogg Foundation. (2001). Logic model development guide. Retrieved November Jl, 2007,
fr om h ttp://www.wkkf.org/default.aspx?tabid= l 01 &Cm =28l&Catl0=28 l <emTD- 2813669&
N ID=20&La nguageiD=O
http:/ /www.wkkf.org
Web site from theW. K. Kellogg Foundation containing useful templates and exercises in developing
a logic model for a research project.
http:/ /www.unitedway.org/Outcomes/Resources/MPO/index.cfm
Web site from the United Way’s Outcome Measurement Resource Network, demonstra ting the use of
logic models in clarifying and communicating outcomes.
http:/ /www.cdc.gov/eval/resources.htm#logic%20modcl
Web site from the Centers for Disease Control and Prevention’s Evaluatio1 Working Group, containing
logic model resources.
1. Define the term logic model.
2. Describe the difference between program activities, program outputs, and program outcomes.
3. Discuss the purpose of including lines with arrows in logic models.
4. Discuss the relationship between a program’s theory of change and its logic model.
5. Describe the uses of logic models.